Gasoline powered vibratory plate compactor for compaction of granular soils sub base and ashpalt.

Plate Size - 19.7" x 20.7"

Gasoline powered vibratory plate compactor for compaction of granular soils and sub base.

Plate size 22.4"x13.8"

Gasoline powered rammer (jumping jack) for confined area compaction. Ideal for trench work and cohesive soils. 

Using on gravel or asphalt is a BAD idea.

Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure
Stainless-steel braided discharge hose
Splash lubricated cast iron crankcase to extend the hours of performance
Cast iron head and cylinder for extended durability

This hi-torque electric impact wrench has the power to turn even the rustiest bolt.

With a 1/2 square drive, 6.8 amps of power and 240 ft./lbs. of torque, you have one serious driver.

The convenient rocker switch makes forward/reverse operation a snap and it only weighs 6 lbs.

The easy access brushes make for quick changes.
 

Includes tool and the following sizes of hex sockets with 1/2"square drive: 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"

1/2 in. square drive, 6.8 amp motor

2400 rpm, 2800 bpm, 240 ft.-lbs. torque, reversing

Heavy-duty rocker switch

Powerful 6.5 amp motor, 0 to 4000 rpm, variable speed control

Ramp-off depth locator for easy depth adjustments

10 ft. 2-wire rubber cord

Ergonomic tactile grip and two finger trigger for user comfort and balance
   

This tool is ideal for setting concrete screw fasteners and drilling small holes for anchors.

It can also be used in the drilling only mode for holes in wood, steel and plastic.

D-handle power and a right angle drive head make this drill package perfect for stud and joist drilling.

Powerful 7 amp motors and three speed ranges makes this a versatile tool that will handle a wide range of applications.

This variable temperature Heat Gun offers a range from 90 to 1050 degrees Fahrenheit.

Specifications:

120Volts

450 Watts

3/4" Length of stroke

We stock a variety of blades for all your cutting needs

Weighing in at 10.4 pounds and delivering 3.25 maximum horsepower, this tool offers the best power to weight ratio in the industry.

The blade can bevel to 50 degrees and offers superior visibility and a clear sight line from either side.

5.5 amp motor, 0 to 850 rpm, trigger speed control with reversing

Heavy-Duty industrial chuck

8 ft. 3-wire cord

A cultivator is a digging tool that achieves a depth of up to six inches.

At just 20 lbs, the Mantis Tiller is the original and still the lightest-weight, easiest-to-handle small tiller…ever made!

For tilling jobs where the ground has previously been tilled.

Your tiller will perform best if you adjust it to match the soil conditions.

Rear-tine tiller makes the big jobs look easy.

The tiller is self-propelled with three forward gears (two for tilling) and a reverse. This action is useful for tilling new or extremely tough ground.

Rear tine tillers are ideal for extra large gardens and breaking new ground quickly. Its heavy duty tines churn through the soil, working it thoroughly.

Your tiller will perform best if you adjust it to match the soil conditions.

Mid tine tillers can be used to till soil that had previously been tilled such as an existing garden & to mix in soil amendments.

The rotating tines on front-tine tillers pull the tiller along.

With this design, muscle power must be used to tip the tines into the soil to operate the machine.

This is physically strenuous and makes it difficult for some people to operate the mid-tine tillers.

Cuts up to 1/2" diameter max.
Unit weighs 12 1/4lbs

This contractor-tough time saver is as rugged as it is easy to operate. It has controls positioned for added ease of operation. The Little Wonder edger provides full cutting power at all depths with its height-adjustment system.

Features include:

• 3.5-hp Briggs engine
• Shielded two-belt drive
• Edging depth to 4 in.
• Mud flaps
• 3-qt. gas tank
• 10-in. steel blade
• Edges up to 90 ft. per minute
• Weight is 65 lbs.

Small trenchers are designed to cut narrow trenches for sprinklers, low voltage lighting, dog fence, and surface root pruning.

Trailer available for additional fee.

These propane heaters deliver safe, quiet, and efficient heat to maintain a comfortable environment inside the tent.
Diffusers may be used outside the tent allowing air dispersement to be more gradual and directed.

2"submersible pump, side discharge.  Unit comes with 50' of hose. 

Pumps approx. 73.9 gal/minute

Perfect for pumping out swimming pools

Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening.

Electrically welded base and cylinder assures strength and eliminates leaks.

Not affected by temperature extremes.

All models work in upright, angle or horizontal positions.

Bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening.

Electrically welded base and cylinder assures strength and eliminates leaks.

Not affected by temperature extremes.

All models work in upright, angle or horizontal positions.

 Holds heavy loads indefinitely - will not creep.